Raco Verbatim, Owner'S Manual

Page: 72 / 246

Using the Alarm Ready Schedule Feature
7-4 Verbatim Owner's Manual
7.4 Weekday Schedule Mode 1
The weekday schedule will REARM the Verbatim autodialer daily at the
programmed weekday REARM time and DISARM the Verbatim autodialer
daily at the programmed DISARM time. If no weekend schedule is enabled (via
the Alarm Ready Control Number settings) then the weekday schedule applies
everyday, Monday through Sunday. As noted below, the weekend schedule is
overridden by the weekend and holiday schedules.
7.5 Weekend Schedule Mode 2
If programmed, the weekend schedule operates once a week. The weekend
schedule is set by factory default to be Friday through Monday. If the defaults
are used the Verbatim autodialer could be REARMED every Friday afternoon
at 1700 and DISARMED again every Monday morning at 0800. The weekend
schedule could be changed from the defaults, for example, so that the Verbatim
autodialer would be REARMED on Saturday and DISARMED on Monday (for
organizations with 6 day work-weeks).
When the weekend schedule is enabled the weekday schedule will be
overridden. In other words, there would be no DISARMING of the unit at 0800
Saturday morning.
By default, the weekend REARM/DISARM times are set to be the same as the
weekday REARM/DISARM times. However, non-default weekend REARM/
DISARM times may be entered if the operator so chooses.
Therefore, if personnel regularly leave early on Fridays then the REARM time
could be set to 1500 instead of the usual 1700.
7.6 Holiday Schedule Mode 3
The Holiday schedule is a one-shot, non-recurring schedule which overrides all
of the other schedules.
The Holiday schedule will be set by factory default to some Holiday period in
the past (such as last Christmas).
Note:
For the Holiday schedule only, the exact date is entered including the year.
Once, the Holiday schedule has been run it is complete and finished until a
new schedule, for some date in the future, is entered.
To use the Holiday Alarm Ready Schedule, the operator must enter the REARM
date (month/date/year) and DISARM date (month/date/year).