Raco Verbatim, Owner'S Manual

Page: 57 / 246

Advanced Programming
Verbatim Owner's Manual 6-17
6.2.9 60 Digit Phone Numbers
Telephone numbers may be as long as 60 digits. This allows, for instance, the
Verbatim autodialer to make calls using long distance companies which require
entry of access codes. Even with many digits occupied by long distance
numbers and access codes there will still be sufficient digits remaining for calls
to pager systems requiring complex sequences of terminators, ID numbers, time
delays, tone detects, etc.
6.2.10 Telephone Line Fault Detection (Phone Fault)
The Phone Fault Detection feature tests the telephone line whenever the unit
needs to make a phone call and at a regular programmable time interval (as long
as there are phone numbers programmed).
Phone Fault is turned ON by default but may be disabled if so desired. Also, the
Phone Fault Detection interval is user programmable.
Phone Fault shares a user code with the Automatic Tone/Pulse Selection
capability. The basic user command is code 917. Entering code 917 with no
parameter will cause a recitation of the current settings for Phone Fault and
Automatic Tone/Pulse Selection.
The following parameters may be entered:
u
Turns OFF BOTH Phone Fault Detect and Auto. Tone/Pulse Select
9 1 7 0
u
Turns ON Phone Fault Detect, turns OFF Auto. Tone/Pulse Select
9 1 7 1
u
Turns OFF phone fault detect, turns ON Auto. Tone/Pulse Select
9 1 7 2
u
Turns ON BOTH Phone Fault Detect and Auto. Tone/Pulse Select
(default)
9 1 7 3
Note:
The factory default setting for code 917 is parameter 3, BOTH Phone Fault
Detect and Auto. Tone/Pulse Select ON.
The command code 916 is used to set the Automatic Phone Fault Detection
interval. This time interval can range from 0.1 hour to 24 hours. The factory
default setting is 24 hours. Enter the command 916 followed by a value from
0.1 to 24.0 to program the Phone Fault Detection interval.