Scalar i6000 Installation Guide Super Doc
47
Figure 23
Engaging the Kickstand
The section of the video from 6:43 to 10:01 shows the next few steps. You should watch the next
section of video before you read the procedure steps.
7
Place the robot into its correct parking module directly underneath the loader bracket as follows:
a. Make sure you install the left robot in the left parking module and the right robot in the right
parking module.
b. Grasping the robot at the two “lift points,” lift the robot into a vertical position, with the collectors
facing toward the back of the library.
c. Insert the bottom of the robot into the library first, setting it down
gently and carefully
on the
floor of the library for just a moment.
d. Swing the top of the robot into the library.
e. Make sure the robot is vertical and directly underneath the loader bracket.
CAUTION
Be
Be very careful not to hit the robot against anything as you lift it into
position. Do not let go of the robot until it is hanging from the loader
bracket.
