38
Introduction
4
Route the W1 and W2 cables from the new expansion module through the opening in the left bulkhead
of the control module or last expansion module in the existing configuration.
5
Connect the W1 ribbon cable to the J2 connection on the LBX board on the control module or last
expansion module in the existing configuration.
This connects the J1 connection on the LBX board in the new expansion module to the J2 connection
on the LBX board in the control module or last expansion module in the existing configuration.
route the W1 and W2 cables
through opening in the left
bulkhead
LBX board on
expansion module
LBX board on
control module or
W1 cable
J2
J1
J2
J17
J1
expansion module
(large ribbon cable)
