28
Introduction
Removing the Control Module Cover Plates
Required tools: #2 Phillips screwdriver
From the control module, remove the following (see
Figure 10
). Save the cover plates to reinstall later.
•
LBX/IEX cover plate — Loosen two thumbscrews.
•
Service port panel — Loosen two thumbscrews. You can leave the panel dangling or remove it.
•
Cover plate between the upper and lower drive clusters.
Loosen the four thumbscrews that retain
the cover plate.
•
Bottom drive cluster cover plate. Loosen two thumbscrews.
Figure 10
Removing Cover Plates from the Control Module
Cover Plates Removed
Remove These Cover
Plates
Cover plate
between upper
and lower drive
bays
LBX/
IEX
cover
plate
Bottom drive
cluster cover
plate
Service
port
panel
