58
Introduction
Reinstalling the Cover Plates
Replace all cover plates you removed earlier.
Required tools: #2 Phillips screwdriver
1
From the control module, reinstall the following (see
Figure 32
):
•
LBX/IEX cover plate — Tighten two thumbscrews.
•
Service port panel — Tighten two thumbscrews.
•
Cover plate between the upper and lower drive clusters — Tighten the four thumbscrews that retain
the cover plate.
•
Bottom drive cluster cover plate — Tighten two thumbscrews.
2
From the left parking module and any expansion modules from which you removed a cover plate,
reinstall the following (see
Figure 32
):
•
Large cover plates above the power chassis — Tighten two thumbscrews.
Figure 32
Replacing the Control Module and Left Parking Module Cover Plates
Cover plate
above the power
chassis
Control module
Left parking module
LBX/IEX
cover plate
Bottom drive
cluster cover
plates
Cover plate
between
upper and
lower drive
bays
Service port
panel
