![background image](http://html2.mh-extra.com/html/quantum/scalar-i6000/scalar-i6000_manual_3541230011.webp)
Scalar i6000 Installation Guide Super Doc
11
If the alignment marks cannot be properly aligned
, then the frame-to-frame alignment is incorrect.
You will need to unbolt and realign the frames so the alignment marks meet the specification.
Training Note
: If the alignment marks are within the acceptable range, don't attempt to make
them perfect.
.
Setting the Leg Lock Nuts (Same as Gen 1 Task)
Required tools: 24 mm open end wrench
1
Verify that all leveling legs are carrying load and that the system unit does not rock.
Alignment
marks
Best
Acceptable
Unacceptable