12
Installing Components in the DXi6902 Node
DXi6902 Installation and Configuration Guide
Installing Components in the DXi6902 Node
If the DXi6902 shipped with additional Node components, you
must
install these
additional components in the Node before installing the system in the rack and turning
it on (see
To install the additional Node components, see the following sections:
•
•
•
Installing the Optional i350 or X520 Network Card
•
Opening the Node
Cover
To open the DXi6902 Node cover:
WARNING:
The DXi6902 Node (including hard drives) weighs 53.0 pounds (24.0 kg).
A minimum of two people are required to lift the chassis.
1
Set the Node on a flat, stable surface.
2
Make sure that no cables (power, Ethernet, Fibre Channel, or SAS) are connected to
the Node.
3
Press and hold the power button on the front of the Node for three seconds to fully
drain the system of stored power prior to removing the cover (see
Figure 5 Node Power Button
System Node (Front)
Power Button