Initializing the Storage Arrays and Software
37
DXi6902
b
Right-click the network connection that corresponds to the Ethernet port on the
computer (for example,
Local Area Connection
), and click
Properties
.
c
Select
Internet Protocol Version 4 (TCP/IPv4)
in the list of connections, and
then click
Properties
.
The
Internet Protocol Version 4 (TCP/IPv4) Properties
window displays (see
).
Figure 32 Internet Protocol
Version 4 (TCP/IPv4) Properties
Window
d
Select
Use the following IP address
and then enter the following information:
Caution:
Before changing the IP address information, write down the
original settings. This will be used later to reset the network
configuration.
•
IP address
- 10.17.21.200
•
Subnet mask
- 255.255.255.0
e
Click
OK
, and then click
Close
.
f
Wait at least two minutes for the computer to set the IP addresses on the local
computer.
4
Using a terminal emulation program that supports SSH (like PuTTY), connect to the
Node with the following IP address:
10.17.21.1
The terminal emulation window displays.
5
Enter
root
for the user name and then enter the service password. (Contact
Quantum ASPS for the service password.)
The command prompt displays.
