28
Installing the DXi6902 System in the Rack
DXi6902 Installation and Configuration Guide
3
Rotate the system downward until all the rail standoffs are seated in the J-slots.
4
Push the system inward until the lock levers click into place.
5
Press the slide-release lock buttons on both rails and slide the system into the rack.
Note:
To remove the Node, locate the lock levers on the sides of the inner rails. Unlock
each lever by rotating it up to its release position. Grasp the sides of the system
firmly and pull it forward until the rail standoffs are at the front of the J-slots.
Lift the system up and away from the rack and place it on a level surface.
Figure 21 Node Installation
Inner slide rails
Rear rail standoffs
Rear rail J-slots
Slide-release lock button
Lock lever
