![background image](http://html1.mh-extra.com/html/quantum/dxi6902/dxi6902_installation-and-configuration-manual_3783275007.webp)
Preparing for the Installation
5
DXi6902
These environmental conditions apply when the DXi6902 system is in operation. For
additional specifications, refer to the
DXi6902 Site Planning Guide
(6-68161).
Preparing for the Installation
Before you begin the installation procedure, make the preparations described in the
following sections:
•
•
Necessary Tools
The following tools are required for unpacking and installing the DXi6902 system:
• #2 Phillips screwdriver
• Small flat head screwdriver
• Notebook computer and Ethernet cable (for initial system configuration)
Note:
The service password is required to perform initial system configuration.
(Contact Quantum ASPS for the service password.)
Taking ESD Precautions
Some components within the DXi6902 system contain static-sensitive parts. To avoid
damaging these parts while performing installation procedures, always observe the
following precautions:
• Keep the DXi6902 system turned off during all installation procedures.
• Keep static-sensitive parts in their original shipping containers until ready for
installation.
• Do not place static-sensitive parts on a metal surface. Place them inside their
protective shipping bag or on an antistatic mat.
• Wear anti-static wrist bands when unpacking and handling the units, and avoid
touching connectors and other components.
Note:
Dry climates and cold-weather heating environments have lower relative
humidity and are more likely to produce static electricity.