18
Installing Components in the DXi6902 Node
DXi6902 Installation and Configuration Guide
Figure 11 Replacing the
Cooling Shroud
b
Lower the cooling shroud into the chassis until it is firmly seated.
Note:
For proper seating of the cooling shroud in the chassis, ensure that the
cables inside the system are routed along the chassis
Installing the Optional
i350 or X520 Network
Card
The following network card options are available for all DXi6902 configurations (see
•
Dual port 10 GbE (X520) card
- Provides two 10 GbE (SFP+) Ethernet ports.
•
Quad port 1 GbE (i350) card
- Provides four 1 GbE Ethernet ports.
The additional Ethernet ports can be used for management, replication, or data traffic.
If ordered with the configuration, install the provided optional network card in PCIe slot
2, located in expansion card riser 1 (see
Cooling shroud
