Quantec Zombies 12xx Series, Operation Manual

Page: 124 / 145

Operation Guide Revision 3.7c
©1994 - 2003 Quantec® Tonstudiotechnik GmbH, Munich, Germany
124
Repetition
The user defines how many times the packets of a message should be repeated in this submenu
item.
AES18 Config
Repetition: 0
Pulsar no operation (stop)
Pulsar to the submenu item
View Priority
Exit back to the main menu item
AES18 Config
Enter
to the submenu item
Set Repetition
Toggle
no operation
ENTER causes an arrow to appear after the colon, and the user arrives at the submenu item
Set
Repetition
.
AES18 Config
Repetition:> 0
Pulsar select value
Pulsar select value
Exit back to the submenu item
View Repetition
Enter back to the submenu item
View Repetition
Toggle no operation
Turning the pulsar or enables the user to determine a number of repetitions between
0
and
5
. If
0
is selected, the packets of each message will be sent only once, if 5 is selected the
packets of each message will each be sent a total of six times.
EXIT discards the selection, and returns the user to the submenu item
View Repetition
.
ENTER saves the value chosen, and takes the user to the submenu item
Set Repetition
.
When
TX Paramter
is set to
var
, this parameter is defined via the serial interface for every
message and cannot be adjusted here. Where this is the case, the following readout appears in the
display:
AES18 Config
Repetition: var