Quantec Zombies 12xx Series, Operation Manual

Page: 49 / 145

2. Menu Structure - 2.4 CS Data symbolic
ZOMBIEs 12xx
49
Edit Force
The specifications for the outgoing channel status items with source set to FORCE are set in this
submenu item .
Edit GL Force
A
B
Locked:>GL-Input
Pulsar next option
Pulsar previous option
Exit back to the submenu item
Show Source
Enter
accept new channel status value
Toggle discard selection
EXIT discards the new settings and returns the user to the submenu item
View Source
.
Hitting ENTER saves the selected setting. This is normally followed by a return to
View
Source
. However, if the items
Origin
,
Dest
,
LSA
or
TOD are being edited, the
cursor jumps to the next character.
To leave these items it is necessary to hit
EXIT after saving the selected settings with ENTER.
TOGGLE discards the selected settings, but does not take the user out of the submenu. The original
value is again displayed.
The tables on the following pages indicate the range of specifications which can
be assigned to each item.
The format of the global loop, orientated towards the studio, is always of the
type »Professional«.
In the case of local loops with AES/EBU or SPDIF interfaces the user can set the
item
FORMAT
to either »Professional« or »Consumer«.
All items which can be set to »Professional« as well as to »Consumer« are
automatically converted from one to the other.
NOTE: Here it is important to remember to set the
FORMAT
of the Local Loop
output to the same data format which is expected at the local loop input.