Quantec Zombies 12xx Series, Operation Manual

Page: 116 / 145

Operation Guide Revision 3.7c
©1994 - 2003 Quantec® Tonstudiotechnik GmbH, Munich, Germany
116
TX Parameter
The source which should be used for the TX address, Priority
and
Repetition are
defined in this submenu item.
AES18 Config
TXParameter: var
Pulsar to the submenu item
View Terminate CR
Pulsar to the submenu item
View RX Address
Exit back to the main menu item
AES18 Config
Enter to the submenu item
Set TX Parameter
Toggle no operation
Hitting ENTER causes an arrow to appear after the colon. The user arrives at the submenu item
Set TX Parameter
.
AES18 Config
TXParameter:>fix
Pulsar select value
Pulsar select value
Exit back to the submenu item
View TX Parameter
Enter back to the submenu item View TX Parameter
Toggle
no operation
Turning the pulsar ( and ) enables the user to define whether the values for
TX Address
,
Priority
and
Repetition
are defined by the information arriving from the LL (
var
) or are
fixed (
fix
). The setting
var
offers the advantage of being able to send messages to different
destinations, the setting
fix
is easier to handle.
EXIT discards the selection, and returns the user to the submenu item
View TX Parameter
.
ENTER saves the selection, and also returns the user to the submenu item
View TX
Parameter .