Quantec Zombies 12xx Series, Operation Manual

Page: 101 / 145

2. Menu Structure - 2.10 Config Audio DSP (/DSP option only)
ZOMBIEs 12xx
101
LL Length
(ZOMBIEs >16bit only)
The word length of the local loop output, that is that of the recording path, is set in this main
menu item.
Config Audio DSP
LL Length: 16bit
Pulsar no operation (stop)
Pulsar to the previous submenu item
View NS mode
Exit to the main menu item
Config Audio DSP
Enter
select word length
Toggle Snoop-mode on/off
Hitting ENTER takes the user to the submenu item
Set LL Length
. An arrow now appears
after the colon:
Config Audio DSP
LL Length:>16bit
Pulsar output word length
20 bit
Pulsar
output word length
16 bit
Exit to the submenu item
View LL Length
Enter accept LL output word length selected
Toggle Snoop-mode on/off
Turning the pulsar or allows the user to select a word length of either
16 bit
or
20
bit
. Where the LL interface only supports the 16 bit word length, this submenu item is not
displayed.
ENTER saves the selected value, and takes the user back to the submenu
View LL Length
.
EXIT discards the selected value, and also takes the user back to the submenu
View LL
Length
.
TOGGLE is used to switch the Snoop-mode of the recording path on or off. In Snoop-mode the
signal level is raised by +48dB for test purposes.
When Snoop mode is switched on, the upper right corner of the display displays
+48dB.