Quantec Zombies 12xx Series, Operation Manual

Page: 123 / 145

2. Menu Structure - 2.12 AES18 Config (1218 only)
ZOMBIEs 12xx
123
Priority
The priority of the outgoing messages to be sent is defined in this submenu item.
AES18 Config
Priority: 0
Pulsar
to the submenu item
View Repetition
Pulsar to the submenu item
View TX Address
Exit back to the main menu item
AES18 Config
Enter to the submenu item
Set Priority
Toggle no operation
ENTER causes an arrow to appear after the colon, and the user arrives at the submenu item
Set
Priority
.
AES18 Config
Priority:> 0
Pulsar select value
Pulsar select value
Exit back to the submenu item
View Priority
Enter back to the submenu item
View Priority
Toggle no operation
Turning the pulsar or allows the user to assign a message priority between
0
(the lowest)
and
3
(the highest). The priority defines how quickly a message can be sent.
EXIT discards the modification, and returns the user to the submenu item
View Priority
.
ENTER saves the modification, and brings the user to the submenu item
Set Priority
.
When
TX Paramter
is set to
var
, this parameter is defined via the serial interface for every
message and cannot be adjusted here. Where this is the case, the following readout appears in the
display:
AES18 Config
Priority: var