Quantec Zombies 12xx Series, Operation Manual

Page: 71 / 145

2. Menu Structure - 2.7 Config Delay(1212 only)
ZOMBIEs 12xx
71
Select Display Mode
The scale which should be used to adjust the delayline settings is selected in this submenu item.
GL>LL Del.(Samp)
A
B
: 131071.00+21
Pulsar
change units
Pulsar change units
Exit back to the submenu item
View Delay
Enter to the submenu item
Set Delay
Toggle
select channel
EXIT takes the user back to the submenu
View Delay
. The ZOMBIE “remembers” the last
scale used. The next time the menu or the corresponding menu for the other audio path is accessed,
the last units used will be displayed automatically.
ENTER takes the user to the submenu
Set Delay
. The desired delay times can now be adjusted.
TOGGLE selects the delaylines which are to be adjusted in
Set Delay
(
A
,
B
,
A
B
). If only one
stereo channel is chosen its settings are shown. If both stereo channels are to be adjusted (
A
B
) the
setting for channel
A is displayed
.
Turning the pulsar ( and ) allows the user to select the desired units (
Samples
,
S525
,
PAL
,
FILM , m or µs ). The visual appearance of this menu, outlined in the following, depends both on
the units selected, and on whether FINE DELAY is currently enabled or disabled.