Quantec Zombies 12xx Series, Operation Manual

Page: 92 / 145

Operation Guide Revision 3.7c
©1994 - 2003 Quantec® Tonstudiotechnik GmbH, Munich, Germany
92
De-Emphasis
The configuration of the digital de-emphasis filter is performed in this submenu item.
The 50/15µs de-emphasis filter is located between the LL input and the GL output on the audio
path, i.e. on the return path of the external device to the LL.
Config Audio DSP
De-Emphasis: OFF
Pulsar to the submenu item
View DC Filter
Pulsar no operation (stop)
Exit to the main menu item
Config Audio DSP
Enter set de-emphasis mode
Toggle Snoop mode on / off
Hitting ENTER takes the user to the submenu item
Set De-Emphasis
. An arrow now appears
after the colon. The de-emphasis filter mode can now be selected. The following display readout
appears:
Config Audio DSP
De-Emphasis:>OFF
Pulsar next mode
Pulsar
previous mode
Exit back to the submenu item
View De-Emphasis
Enter save new mode
Toggle Snoop mode on/off
The following de-emphasis modes may be selected:
ON
filter constantly active
OFF
filter not active
CAP
filter active depending on the emphasis bit of the LL Channel
Status
ENTER saves the selection and returns the user to the submenu item
View De-Emphasis
.
EXIT discards any modification made and returns the user to the submenu item
View De-
Emphasis
.