Qualitrol 509ITM Series, Manual

Page: 32 / 189

32
www.qualitrolcorp.com
MENU, View Mode Scrolling, Right Arrow, Right Arrow, Right Arrow
From Viewing Mode, press the Right Arrow thrice. The Up and Down Arrows (or ENTER )
will move you through the minimum values, as well as the time and date of each parameter
being monitored. Press
RESET to reset all of the minimum readings. If no activity takes
place for 60 seconds, the monitor automatically reverts to Auto Scroll, or press MENU again
to revert the system back to Viewing Mode Scrolling.
Note:
To avoid any erroneous readings caused by the installation, Qualitrol recommends
resetting the minimum values immediately after setting up the monitor.
Viewing TransLife
TM
Values
MENU, View Mode Scrolling, Right Arrow, Right Arrow, Right Arrow, Right Arrow
From Viewing Mode, press the Right Arrow four times. The Up and Down Arrows (or
ENTER ) will move you through the TransLife
TM
values, time to critical point, consumed life
and temperature profiler. If no key activity takes place for 60 seconds, the monitor
automatically reverts to Auto Scroll, or press
MENU again to revert the system back to
Viewing Mode Scrolling.
Viewing Data Logging Options
MENU, View Mode Scrolling, Right Arrows
If the Data Logging Option is installed, from Viewing Mode, press the Right Arrow five times.
The Down Arrow (or
ENTER ) will move you to the Data Logger Option to download the Data
Logging data to a memory stick. If no key activity takes place for 60 seconds, the monitor
automatically reverts to Auto Scroll, or press
MENU again to revert the system back to
Viewing Mode Scrolling.
Viewing Event Recorder Options
MENU, View Mode Scrolling, Right Arrows
If the Event Recorder Option is installed, from Viewing Mode, keep pressing the Right Arrow
until arriving at the Event Recorder. The Down Arrow (or
ENTER ) will move you to the Event
Recorder Option to download the Event Recorder data to a memory stick. If no key activity
takes place for 60 seconds, the monitor will automatically reverts to Auto Scroll, or press
MENU again to revert the system back to Viewing Mode Scrolling.
Viewing Cooling Monitor Readings (509ITM-200)
MENU, View Mode Scrolling, Right Arrows
From Viewing Mode, keep pressing the Right Arrow until you reach the Cooling Monitor
column
. The display will read “Cooling Monitor Active (or Inactive).” Press the Up or Down
Arrows (or ENTER ) to move you through the Cooling Monitor values for all active systems. If
no key activity takes place for 60 seconds, the monitor automatically reverts to Auto Scroll,
or press
MENU again to revert the system back to Viewing Mode Scrolling.
See the section on the Cooling System Monitor in this manual and the section on the
Cooling Monitor in the Hardware and Software sections for more information on this
operation.