Qualitrol 509ITM Series, Manual

Page: 38 / 189

38
www.qualitrolcorp.com
Outputs Control/Alarm Contacts:
Eight Form C relay contacts for cooling control,
alarms, trip, etc.
Diagnostics Alarm: One Form C relay for power, sensors and internal
circuitry diagnostics
Heater Control: One relay
Relay Contact Ratings: 10A @ 115/230 V AC, 10A @ 30 V DC
Remote (SCADA)
Outputs: Four loops; 0 -
1 mA (max resistive load 10,000 Ω, 4
-
20 mA (max resistive load 450 Ω), other options
available
Data Communications: RS-232, RS-485 (optically isolated); optional fiber
optic serial interface uses ST connector, 820 nm
wavelength, max distance 1500 meters; optional
base 10/100 Ethernet TX, RJ45 connection; optional
base 100 Ethernet FX, ST connectors
Protocols: DNP 3.0 (Level 1 slave), Modbus, ASCII,
IEC 60870, IEC 61850
Memory
Data Logger
20 variables; able to log 14 variables at 1 minute
store rates for over 90 days without overwriting.
Event Recorder 8 individual events
CE
Compliance Dielectric Isolation (High-
Pot): 2500 V AC, 60 seconds to ground
Immunity EN61000-6-5 & IEEE C37.90.1
Emissions CISPR 11 Class A
Safety: EN60255-27
Environment Temperature Range: -40 - +70° C
Storage Temperature: -50 - +85° C
Humidity: 90% non-condensing
Vibration: 60/120 Hz @ .004 inch displacement
Shock: 10 Gs half-sine, in 3-orthogonal planes
Weatherproof Enclosure:
NEMA #3R (vented), UV stabilized, corrosion-proof
fiberglass
Weight Approximately: Weatherproof enclosure version: 11.5 lb (5.2 kg)
Panel Mount version: 4.5 lb (2.0 kg)
Terminal Connectors: Accepts wire sizes from 24 - 12 AWG; Cu wire only;
minimum 300 volt insulation rating; screw torque 5.0
in/lb