Qualitrol 509ITM Series, Manual

Page: 34 / 189

34
www.qualitrolcorp.com
Program Mode
MENU, View Mode Scrolling, Right Arrows
From Viewing Mode, keep pressing the Right Arrow until you reach the Change Settings
column. Press
ENTER to go to Change Settings Mode. This is the location where you can
change some of the settings of the monitor. This mode is protected. Before you are allowed
to change any parameters, you must first enter the
user ID #. This is the same “password”
that is used to enter the Customer Setup in the remote software. If you are not authorized to
change these settings, press
MENU to go back to Viewing Mode Scrolling.
The Up and Down Arrows allow you to change the value of the character highlighted by the
display, while the Right and Left Arrows move the highlighted character. Press
ENTER to
move to the next setting. At the end of the Program Mode menu, press ENTER to reboot the
system. If no activity takes place for 60 seconds, the monitor automatically reverts to Auto
Scroll and discards any changes that were made, or press
MENU again to revert back to
Auto Scroll.
Front Panel Control