Qualitrol 509ITM Series, Manual

Page: 44 / 189

44
www.qualitrolcorp.com
Password Each tool requires a password. Passwords are set at the factory, but
you can change them when you are in the tool. The factory default
passwords are:
Monitor 111111
Simulator 111111
Calibrator If required, call Qualitrol Application Engineering
at 585-586-1515 x 33317.
Customer
Setup 111111
The Factory Setup tool can only be entered by Qualitrol factory
personnel. This section is reserved for the factory except in the
Demo
mode (offline).
Remember Me
Check Box By checking in this check box, the password is stored in the
communications file so that you do not have to re-enter it every time
you start the tool.
Important:
Enabling this feature will disable security protection and
allow anyone using this computer to gain access to the
software.
Start Button Activates the selected tool.