quadient IS-420 User Manual Download

Page: 21 / 220

Accessories

2.2

USB Keyboard (option)

Usage

A USB keyboard can be connected to the mailing system.

This keyboard is a standard personal computer keyboard with an additional touchpad.

It allows the input of data to your mailing system.
To use the numerical keys, ensure that

[Num lock]

is activated.

You can use the shortcuts listed in the table below.

Keyboard use

NAVIGATION KEYS

Validates the current screen.

[Enter]

Deletes the last character or digit in an entry field.

[Backspace]

Clear

Deletes the next character or digit in an entry
field.

[Del]

Delete

Returns to previous screen or cancels the
selection.

[Esc]

Back / Cancel

Moves to the next entry field.

[Tab]

Change field

Moves the cursor before the character at the left.

[Left arrow]

Move before

Moves the cursor after the character at the right.

[Right arrow]

Move after

| Page 16 | Jul-24-2023 01:59 |

Meet

Your

Mailing

System

Summary of Contents for IS-420





























































































































































































































Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands

quadient IS-420, User Manual

Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands