quadient IS-420 User Manual Download

Page: 186 / 220

How to Display Ink Level and Cartridge Data (as Supervisor)

To display the Ink Level and the Cartridge Data:
1.

As supervisor (see

How to Log in as Supervisor

on page 134):

Press

and select the path:

Maintenance

Cartridge

Ink information

The Ink information screen is displayed.

Setting the Headset Alignment

Aligning the print heads is required if there is an between the top and the bottom of

the imprints.

Your Mailing System requires the heads to be aligned after each

cartridge change.

How to Align the Print Heads

To align the print heads:

Maintaining

your

Mailing

System

181

| Page 181 | Jul-24-2023 01:59 |

Summary of Contents for IS-420





























































































































































































































Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands

quadient IS-420, User Manual

Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands