quadient IS-420 User Manual Download

Page: 139 / 220

Logging in / out as the Supervisor

8.2

Log in as supervisor

You need to be logged in as supervisor to configure the Mailing System and perform

functions such as managing accounts and access rights, generating certain reports,

etc.

When you are logged in as supervisor, only the supervisor menu

is available. Printing postage is not possible while logged-in as

supervisor.

How to Log in as Supervisor

To log in as Supervisor when you are already logged in as a user:
1.

As a user:

Press

and select the path:

Supervisor

The Login screen is displayed.

Type the supervisor PIN code and press

[OK]

The supervisor Main menu is displayed.

You can log in as supervisor by directly typing the supervisor

PIN code, in place of a regular user PIN code, on Mailing Systems

that ask for a PIN code at start-up.

134

| Page 134 | Jul-24-2023 01:59 |

Configuring

your

Mailing

System

Summary of Contents for IS-420





























































































































































































































Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands

quadient IS-420, User Manual

Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands