quadient IS-420 User Manual Download

Page: 62 / 220

How to Change the Weighing Type

To change the weighing type from the home screen:
1.

Either:

Press

and select the path:

Batch settings Weighing

type

Press

The Weighing type screen is displayed.

The options actually displayed in the screen depend on the

weighing devices that are connected to your Mailing System

and on features that are activated.

Select the weighing type.

If you select the option Differential Weighing Automatic tape,

make sure the Auto-Label Dispenser is properly filled with labels.

See

How to Fill the Automatic Label Dispenser

on page 65.

Processing

Mail

| Page 57 | Jul-24-2023 01:59 |

Summary of Contents for IS-420





























































































































































































































Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands

quadient IS-420, User Manual

Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands