quadient IS-420 User Manual Download

Page: 66 / 220

How to Move the Imprint (Print Offset)

To add an offset to the imprint position:
1.

As a user:

Press

and select the path:

Batch settings

Print offset

The Print offset setting screen is displayed.

Select the offset and press

[OK]

to validate.

Using Job Memories

Job Memories allow you to create a preset memory that can include

the rate, custom

text, slogan

for the Type of imprint you would like to use.

In account-activated configurations, Job Memories allow you assign postage costs to

pre-selected

accounts

If your mail requires different settings, then the job memories

are the solution: all your settings are stored in a single memory.

Just press the job memory key instead of multiple keystrokes to

select all the required elements.

See also

•

To prepare job memories

as supervisor, see

Job Memories

on page 156.

Processing

Mail

| Page 61 | Jul-24-2023 01:59 |

Summary of Contents for IS-420





























































































































































































































Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands

quadient IS-420, User Manual

Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands