quadient IS-420 User Manual Download

Page: 173 / 220

Managing Options

9.3

Consulting the Option List

The option list includes the options actually loaded into your Mailing System and

indicates the options that are activated.
You can also display details for each option.

For more information about the options you can add to your

Mailing System, please contact customer service.

How to Display the Options

To display the option list:
1.

As supervisor (see

How to Log in as Supervisor

on page 134) either:

Press

and select the path:

Options and Updates

Option list

The Options list screen is displayed.

To display the details of an option, select the option and press

[OK]

168

| Page 168 | Jul-24-2023 01:59 |

Options

and

Updates

Summary of Contents for IS-420





























































































































































































































Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands

quadient IS-420, User Manual

Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands