quadient IS-420 User Manual Download

Page: 22 / 220

Touchpad use

The touchpad is available to move the screen cursor in much the same way a mouse

is used.
Further, left and right click buttons are available to be used for selecting items.
In addition, it allows you to:

• Exactly position the cursor in an entry field.
• Select a part of the content of an entry field.

Report Printer (option)

A USB printer can be directly connected to the mailing system for printing

mailing-related reports.

For more information about compatible printers that can connect

to your mailing system, please contact technical support.

Meet

Your

Mailing

System

| Page 17 | Jul-24-2023 01:59 |

Summary of Contents for IS-420





























































































































































































































Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands

quadient IS-420, User Manual

Search results

Summary of Contents for IS-420

Reviews:

Related manuals for IS-420

Brands by name

Popular brands