QNO FQR7200, User Manual

Page: 58 / 184

Multi-WAN Router
55
Example 2:How do I set up Auto Load Balance Mode to keep Intranet IP 192.168.1.150 ~ 200 from going
through WAN2 when the destination port is Port 80?
As in the figure below, select “HTTP [TCP/80~80]” from the pull-down option list “Service”, and
then in the boxes for “Source IP” input “192.168.1.150” to “200”. Retain the original numbers “0.0.0.0”
in the boxes of “Destination IP” (which means to include all Internet IP addresses). Select WAN2 from
the pull-down optio
n list “Interface”, and then click “Enable”. Finally, click “Add New” and the rule will be
added to the mode.