QNO FQR7200 User Manual Download Page 30

Page: 30 / 184

Multi-WAN Router

WAN IP address:

Input the available static IP address issued by ISP.

Subnet Mask:

Input the subnet mask of the static IP address issued by ISP, such as:

Issued eight static IP addresses: 255.255.255.248

Issued 16 static IP addresses: 255.255.255.240

Default Gateway:

Input the default gateway issued by ISP. For ADSL users, it is usually an

ATU-R IP address. As for optical fiber users, please input the optical fiber

switching IP.

DNS Server:

Input the DNS IP address issued by ISP. At least one IP group should be input.

The maximum acceptable is two IP groups.

Enable

Line-Dropped

Scheduling:

The WAN disconnection schedule will be activated by checking this option. In

some areas, there is a time limitation for WAN connection service. For

example: the optical fiber service will be disconnected from 0:00 am to 6:00

am. Although there is a standby system in the device, at the moment of WAN

Summary of Contents for FQR7200

























































































































































































Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands

QNO FQR7200, User Manual

Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands