QNO FQR7200 User Manual Download Page 20

Page: 20 / 184

Multi-WAN Router

5.1.4 Firewall Status

SPI (Stateful Packet Inspection)

: Indicates whether SPI (Stateful Packet Inspection) is on or off. The

default configuration is “On”.

DoS (Denial of Service)

:Indicates if DoS attack prevention is activated. The default configuration is

“On”.

Block WAN Request

:Indicates that denying the connection from Internet is activated. The default

configuration

is “On”.

Prevent ARP Virus Attack

:Indicates that preventing Arp virus attack is acitvated. The default

configuration is “Off”.

Remote Management:

Indicates if remote management is activated (on or off). Click the hyperlink to

enter and manage the configur

ation. The default configuration is “Off”.

Access Rule

:Indicates the number of access rule applied in Router.

5.1.5 Log Setting Status

Syslog Server:

Indicates if Syslog Server is Enabled or Disabled.

E-mail Alert:

(Future Feature)

Indicates if Email Alert is Enabled or Disabled.

E-Mail link will be connected to syslog setting page:

If you do not have the email address set in system log, it will show

“E-mail cannot be sent

Summary of Contents for FQR7200

























































































































































































Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands

QNO FQR7200, User Manual

Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands