QNO FQR7200, User Manual

Page: 33 / 184

Multi-WAN Router
30
through this WAN will be disconnected too. Only after the disconnected
lines are reconnected can they go through the standby system to connect
with the Internet. Therefore, to avoid a huge number of disconnections,
users can activate this function to arrange new connections through
another WAN to the Internet. In this way, the effect of any disconnection
can be minimized.
Line-Dropped
Period
Input the time rule for the disconnection of this WAN service.
Line-Dropped
Scheduling
Input how long the WAN service may be disconnected before the newly
added connections should go through another WAN to connect with the
Internet.
Link Backup
Interface
Select another WAN port as link backup when port binding is configured.
Users should select the port that employs the same ISP.
Shared- Circuit WAN
environment
If your WAN connects to a Switch, select “Enabled” to filter broadcast
packets. The default is “Disabled”.
MTU:
MTU is abbreviation of Maximum Transmission Unit. “Auto” and “Manual”
can be chosen. The default value is 1500. Different value could be set in
different network environment. (e.g. ADSL PPPoE MTU: 1492)
The default is “Auto”.
After the changes are completed, click
“Apply”
to save the configuration, or click
“Cancel"
to leave
without making any change.
PPTP
This option is for the PPTP time counting system. Input the user’s connection name and password issued
by ISP, and use the built-in PPTP software to connect with the Internet.