QNO FQR7200 User Manual Download Page 144

Page: 144 / 184

Multi-WAN Router

141

Operation-Master Mode

Besides operating network with another device, Master device is also

the DHCP server to issue LAN IP addresses. Although Slave device

also supports outbound linking, its DHCP server is disabled.

WAN Backup

(The Checked WANs are not

working in this device.)

The checked WANs will works in the other device. For an example, if

WAN1 and WAN2 work in this device, and WAN3 and WAN4 work in

the other device, WAN3 and WAN4 should be checked.

LAN Gateway Backup

Input LAN IP of Slave device. The IP should be different from LAN IP

of Master device.

MAC Address of the backup device

Input LAN MAC of Slave device. It should be different from LAN MAC

of Master device.

Status

“Status-Normal” means both two devices operate normally.

“Status-Backup” indicates Slave mode has problems, and the device

enables backup to take over WAN

Summary of Contents for FQR7200

























































































































































































Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands

QNO FQR7200, User Manual

Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands