QNO FQR7200, User Manual

Page: 26 / 184

Multi-WAN Router
23
LAN Setting
This is configuration information for the device current LAN IP address. The default configuration is
192.168.1.1 and the default Subnet Mask is 255.255.255.0. It can be changed according to the actual network
structure.
Multiple-Subnet Setting:
Click “Add/Edit” to enter the configuration page, as shown in the following figure. Input the respective IP
addresses and subnet masks.
This function enables users to input IP segments that differ from the router network segment to the
multi-net segment configuration; the Internet will then be directly accessible. In other words, if there are
already different IP segment groups in the Intranet, the Internet is still accessible without making any changes
to internal PCs. Users can make changes according to their actual network structure.
Dynamic IP
There are four set of Class C DHCP server. The defaults are enable. LAN PCs can get IP automatically
without configured and recorded.
IP Range Start: The four default IP segments initial from 192.168.1.100, 192.168.2.100,
192.168.3.100, 192.168.4.100. Users can configure according actual
demand.
IP Range End: The four default IP segments end at 192.168.1.149, 192.168.2.149,
192.168.3.149, 192.168.4.149. It means there are 50 IPs in one of
segments. Users can configure according actual demand.