QNO FQR7200 User Manual Download Page 29

Page: 29 / 184

Multi-WAN Router

added connections should go through another WAN to connect with the

Internet.

Link Backup Interface

Select another WAN port as link backup when port binding is

configured. Users should select the port that employs the same ISP.

Shared- Circuit WAN

environment

If your WAN connects to a Switch, select “Enabled” to filter broadcast

packe

ts. The default is “Disabled”.

MTU:

MTU is abbreviation of Maximum Transmission Unit. “Auto” and

“Manual” can be chosen. The default value is 1500. Different value

could be set in different network environment. (e.g. ADSL PPPoE MTU:

1492)

The default is “Auto”.

After the changes are completed, click

“Apply”

to save the configuration, or click

“Cancel"

to leave

without making any changes.

Static IP

If an ISP issues a static IP (such as one IP or eight IP addresses, etc.), please select this connection

mode and follow the steps below to input the IP numbers issued by an ISP into the relevant boxes.

Summary of Contents for FQR7200

























































































































































































Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands

QNO FQR7200, User Manual

Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands