QNO FQR7200 User Manual Download Page 41

Page: 41 / 184

Multi-WAN Router

IP address:

Indicates the current default static IP address.

Config.:

Indicates an advanced configuration modification: Click

Edit

to enter the advanced configuration

page.

The DMZ configuration can be classified by Subnet and Range:

Subnet:

The DMZ and WAN located in different Subnets

For example: If the ISP issued 16 real IP addresses: 220.243.230.1-16 with Mask 255.255.255.240, users

have to separate the 16 IP addresses into two groups: 220.243.230.1-8 with Mask 255.255.255.248, and

220.243.230.9-16 with Mask 255.255.255.248 and then set the device and the gateway in the same group

with the other group in the DMZ.

Range:

DMZ and WAN are within same Subnet

Summary of Contents for FQR7200

























































































































































































Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands

QNO FQR7200, User Manual

Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands