QNO FQR7200, User Manual

Page: 62 / 184

Multi-WAN Router
59
then click “Enable”. Finally, click “Add New” and the rule will be added to the mode. The second rule:
Select “All Port [TCP&UDP/1~65535]” from the pull-down option list “Service”, and then in the boxes of
“Source IP” input “192.168.1.0 ~ 0” (which means to include all Intranet IP addresses). In the boxes of
“Destination IP” input “211.1.1.1 ~ 60,254,254,254”. Select WAN2 from the pull-down option list
“Interface”, and then click “Enable”. Finally, click “Add New”, and the rule will be added to the mode.
After the rule has been set up, all traffic that is not going to the assigned destinations will only be
transmitted through WAN1.