QNO FQR7200, User Manual

Page: 21 / 184

Multi-WAN Router
18
because you have not specified an outbound SMTP server address.
” —— represents that
you do not have email setting and it can not send out syslog emails.
2. If you have the email address set in system log, but the log does not meet the sending log
conditions, it will show
“E-mail settings have been configured.” —— represents that you
already have the email setting, but the log does not meet the sending log conditions yet.
3. If you have the email address set in system log, and log is sent out, it will show
“E-mail settings
have been configured and sent out normally.
” —— represents that you already have the email
setting, and the log is set out to the email address.
4. If you have the email address set in the system log, but the log can not be sent out correctly, it will
show
“E-mail cannot be sent out, probably use incorrect settings.” —— represents that there
is email address setting, but the log can not be sent out, which might be due to the incorrect
setting.
5.2 Change and Set Login Password and Time
5.2.1 Password Setting
When you login Router setting window every time, you must enter the password. The default value for
Router
username and password are both “admin”. For security reasons, we strongly recommend that you
must change your password after first login. Please keep the password safe, or you might not login to Router.
You can press Reset button for more than 10 sec, Router will return back to default.