QNO FQR7200 User Manual Download Page 53

Page: 53 / 184

Multi-WAN Router

Protocol Binding

Users can define specific IP addresses or specific application service ports to go through a user-assigned

WAN for external connections. For any other unassigned IP addresses and services, WAN load balancing will

still be carried out.

Note

！

In the load balance mode of Assigned Routing, the first WAN (WAN1) cannot be assigned. It is to

be saved for the IP addresses and the application Service Ports that are not assigned to other WANs

(WAN2, WAN3, and WAN4) for external connections. In other words, the first WAN (WAN1) cannot be

configured with the Protocol Binding rule. This is to avoid a condition where all WANs are assigned to

specific Intranet IP or Service Ports and destination IP, no more WAN ports will be available for other IP

addresses and Service Ports.

Summary of Contents for FQR7200

























































































































































































Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands

QNO FQR7200, User Manual

Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands