QNO FQR7200 User Manual Download Page 25

Page: 25 / 184

Multi-WAN Router

Device name and domain name can be input in the two boxes. Though this configuration is not necessary

in most environments, some ISPs in some countries may require it.

6.1.2 LAN Setting

LAN setting is shown and can be configured in this page. The LAN MAC can be modified. When a new

router replaces an old one, LAN MAC can be changed as MAC of the original device. Gateway ARP binding

with LAN PCs won

’t need to be configured again. Click “Unified IP Management” to setup.

This is configuration information for the device current LAN IP address. The default configuration is

192.168.1.1 and the default Subnet Mask is 255.255.255.0. It can be changed according to the actual network

structure.

Unified IP Management

LAN IP and IP segment group (DHCP) can be configured here.

Summary of Contents for FQR7200

























































































































































































Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands

QNO FQR7200, User Manual

Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands