QNO FQR7200 User Manual Download Page 86

Page: 86 / 184

Multi-WAN Router

8.1.3 Smart QoS

Enabled QoS:

Choose to apply QoS function.

When the usage of any WAN

’s

bandwidth is over___%, Enable Smart

QoS

Input the required rate value into the column. The

default is 60%.

Each IP

’s upstream bandwidth threshold

(for all WAN):

Input the max. upstream rate for intranet IPs.

Each IP

’s downstream bandwidth

threshold (for all WAN) :

Input the max. downstream rate for intranet IPs.

If any IP

’s bandwidth is over maximum

threshold, its maximum bandwidth will

remain:

When any IP uses more bandwidth than the above

upstream or downstream settings, the IP will be

restricted for the following upstream or downstream

bandwidth settings.

Enabled Penalty Mechanism:

After choosing

“Enabled Penalty Mechanism”, the

device will enable the penalty conditions internally.

When the IP still uses more upstream or downstream

bandwidth than the setting, the device will execute the

penalty conditions automatically.

Show Penalty List:

The IPs which are under penalty mechanism will be

Summary of Contents for FQR7200

























































































































































































Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands

QNO FQR7200, User Manual

Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands