QNO FQR7200 User Manual Download Page 105

Page: 105 / 184

Multi-WAN Router

102

Add to list:

Click ”Add to list” to create a new website to be controlled.

Delete selected item:

Click to select one or more controlled websites and click this

option to delete.

Website Blocking by Keywords:

Enabled:

Click to activate this feature. The default setting is disabled.

For example: If users enter the string ”sex”, any websites

containing ”sex” will be blocked.

Keywords

（

Only for English

keyword

）

Enter keywords.

Add to List:

Add this new service item content to the list.

Delete selected item:

Delete the service item content from the list

Apply:

Click “Apply” to save the modified parameters.

Cancel:

Click “Cancel” to cancel all the changes made to the
parameters.

Summary of Contents for FQR7200

























































































































































































Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands

QNO FQR7200, User Manual

Search results

Summary of Contents for FQR7200

Reviews:

Related manuals for FQR7200

Brands by name

Popular brands