Qlogic StorageWorks MPX200, User Manual

Page: 73 / 240

2–Command Reference
Command Syntax
ISR654601-00 D 2-49
Set NTP
Configures the NTP parameters.
Authority
Admin session
Syntax
set ntp
Examples
The following example shows the
set ntp
command:
iSR6200 <
1
> (admin) #> set ntp
A list of attributes with formatting and current values will follow.
Enter a new value or simply press the ENTER key to accept the current value.
If you wish to terminate this process before reaching the end of the list
press 'q' or 'Q' and the ENTER key to do so.
NTP (0=Enable, 1=Disable) [Disabled ] 0
TimeZone Offset from GMT (Min=-12:00,Max=12:00) [00:00 ] -8:0
IP Address [1] (IPv4 or IPv6) [0.0.0.0 ] 207.126.97.57
IP Address [2] (IPv4 or IPv6) [0.0.0.0 ]
IP Address [3] (IPv4 or IPv6) [0.0.0.0 ]
All attribute values that have been changed will now be saved.