Qlogic StorageWorks MPX200, User Manual

Page: 202 / 240

B–Log Messages
B-20 ISR654601-00 D
106853
#%d: QLTimer: Link error count (0x%x)
exceeded, link down
FC Error Driver has determined that the Fibre Channel link is
unreliable and unusable due to the number of errors
encountered. The link has been taken down.
106912
#%d: QLReserveLoopId: out of loop Ids
FC Error Fibre Channel processor was unable to obtain the
number of loop IDs required. This failure occurs only
when the Fibre Channel processor is running multi-ID
firmware.
106928
#%d: QLMarkDeviceOffline: Device Id: %x
marked offline, cLinkDownTimeout = %x,
cPortDownRetryCount=%x
FC Error Driver was unable to re-establish connection to the
target within the timeout and retry counts, and is
therefore marking it
offline .
106948
#%d: QLSnsGetAllNext: Name server login
FAILED %x
FC Error Fibre Channel processor is unable to log into the
Fibre Channel fabric name server.
107029
#%d: QLUpdateDeviceData: out of slots in
host database
FC Error Driver’s host (initiator) database is full.
107030
#%d: QLUpdateDeviceData: out of slots in
target database
FC Error Driver’s target database is full.
107041
#%d: QLUpdateDeviceDatabase 0x%x: GET_ID
failed %x
FC Error Driver’s host (initiator) database is full. Maximum
host database is 64.
107056
#%d: QLUpdateDeviceDatabase 0x%x: out of
slots in host database
FC Error Drivers host (initiator) database is full.
107078
#%d: QLUpdatePort 0x%x: out of slots in
host database
FC Error Driver was unable to re-establish connection to the
target within the timeout and retry counts, and is
therefore marking it
offline .
Table B-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description