Qlogic StorageWorks MPX200, User Manual

Page: 152 / 240

5–Configuring Fibre Channel Initiators to iSCSI Storage
Configuration Overview
5-6 ISR654601-00 D
Step 2: Log into the iSCSI Targets
Issue the
iscsi login
command, and then follow the prompts.
A list of attributes appear with the current value (in brackets). At the prompts,
select the target and IP address, and then specify additional target attributes as
needed. For example:
iSR6200 <1> (admin) #> iscsi login
Index (WWNN,WWPN/iSCSI Name)
----- ----------------------
0
iqn.2001-05.com.equallogic:0-8a0906-7e33e0d06-83c835550264bede-demo1
Please select a Target from the list above ('q' to quit): 0
Index IP Address
----- ----------
0 192.168.95.48
Please select an IP Address from the list above ('q' to quit):
TCP Port No. [3260 ]
Outbound Port (1=GE1, 2=GE2, ...) [GE1 ] 3
Header Digest (0=Enable, 1=Disable) [Disabled ]
Data Digest (0=Enable, 1=Disable) [Disabled ]
iSCSI Login for selected target was successful
To stop this process before reaching the end of the list, press the Q+ENTER keys.
Step 3: Zone the Fibre Channel Host and iSR6200 Router
Get the following information to configure the iSR6200 to the Fibre Channel SAN
and the connection to the EqualLogic array.
For the Fibre Channel SAN, create a list of fabric zones that contain the world
wide port name (WWPN) associated with the servers by entering their values in
Table 5-1 .