Qlogic StorageWorks MPX200, User Manual

Page: 44 / 240

2–Command Reference
Command Syntax
2-20 ISR654601-00 D
show initiators_lunmask
show lunmask
Data Migration Command Set:
===========================
array rm
compare_luns [ add | acknowledge | rm | start | stop | pause | resume |
rm_peer]
dml [ create | delete ]
migration [ add | acknowledge | rm | start | stop | pause | resume | rm_peer ]
migration_group [ add | rm | edit ]
miguser [ begin | end | start | stop | cancel ]
migration_report save | upload
readjust_priority
rescan devices
set array
start_serial_jobs
show [ array | compare_luns | migration |
migration_group | migration_logs | migration_luninfo |
migration_params | migration_usage | migration_perf ]
show array
show compare_luns
show dml
show migration
show migration_group
show migration_logs [ <ENTRIES> ] [ <OFFSET> ]
show migration_luninfo
show migration_params
show migration_usage
show migration_perf <JOBID>
Data Scrubbing Command Set:
===========================
scrub_lun [ add | acknowledge | rm | start | stop | pause | resume |
rm_peer]
show scrub_lun
SAN over Wan Command Set:
=========================
fciproute [add | mod | rm ]
show fciproutes [ <ROUTE_NUM> ]
show fciproutes [ <ROUTE_NUM> ]