Qlogic StorageWorks MPX200, User Manual

Page: 208 / 240

B–Log Messages
B-26 ISR654601-00 D
139930
FcipRoute#%d Failed with Memory
Allocation Error
App Error FCIP route add/mod failed because of lack of mem-
ory.
139931
FcipRoute#%d Failed with Invalid Arg Error
App Error FCIP route add/mod failed because the arguments
supplied were incorrect.
139932
FcipRoute#%d Failed with Unknown Device
Error
App Error FCIP route add/mod failed because of incorrect con-
figuration
139933
FcipRoute#%d Failed with Kernel Error
App Error FCIP route add/mod failed because of configuration
error
139934
FcipRoute#%d Failed with Network
Configuration Error
App Error FCIP route add/mod failed because the Ethernet net-
work
139935
FcipRoute#%d Failed with Persistence Read
Failure
App Error FCIP route add/mod failed because of an error in
reading the saved configuration from persistence
139936
FcipRoute#%d Failed with Persistence
Write Failure
App Error FCIP route add/mod failed because of an error in
writing the route configuration to persistence
139937
FcipRoute#%d Failed with IP Address Reuse
Error
App Error FCIP route add/mod failed because an IP address
supplied is already under use.
139938
FcipRoute#%d Add Failed because relevant
FCIP Licence not available
App Error FCIP route add/mod failed because FCIP license is
not present.
151842
FW Upgrade performed: new version is:
%d.%d.%d.%d
User Info A firmware upgrade was performed; the new version
is:
d.d.d.d .
151843
REBOOT/SHUTDOWN Command from user.
Code=%d
User Info User issued a REBOOT or SHUTDOWN command.
Table B-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description