Qlogic StorageWorks MPX200, User Manual

Page: 201 / 240

B–Log Messages
ISR654601-00 D B-19
106583
#%d: QLUtmReceiveIo: Path invalid/FW No
resource count %x
FC Error Fibre Channel processor received a SCSI command
for an unknown target path or has run out of
resources to execute additional commands.
106589
#%d: QLIoctlEnable: Adapter disabled
FC Error Fibre Channel processor was disabled by an IOCTL
request to the driver.
106590
#%d: QLIoctlEnable: Initialize FW error
FC Error Fibre Channel processor firmware failed initialization.
The request to initialize was received by the driver in
an IOCTL request.
106592
#%d: QLIoctlRunDiag: Diagnostic loopback
command failed %x
% %x %x
FC Error Fibre Channel processor failed the external loopback
test.
106593
#%d: QLIoctlDisable: Re-initialize
adapter failed
FC Error Fibre Channel processor failed to re-initialize in
response to an IOCTL disable request.
106803
#%d: QLIsrEventHandler: Link down (%x)
FC Error Fibre Channel processor reported a link down condi-
tion.
106813
#%d: QLIsrEventHandler: Unexpected async
event (%x), MB1=%x, MB2=%x, MB3=%x,
MB4=%x, MB5=%x, MB6=%x, MB7=%x
FC Error Fibre Channel processor reported an unexpected
asynchronous event. The mailbox registers provide
status, event code, and data related to the event.
106847
#%d: QLProcessResponseQueue: Invalid
EntryStatus %x, type %x
FC Error Fibre Channel controller reported an invalid Entry
Status %x, type %x.
106851
#%d: QLTimer: Heartbeat failed
FC Error Fibre Channel controller failed to provide a heartbeat.
Table B-1. iSR6200 Router Log Messages (Continued)
ID Log Message
Module
Type
Msg.
Type
Description